Effective iron drilling technique

Effective iron drilling technique

Drilling machine 0 Comment

Guideline iron drilling techniques properly ensure labor safety and ensure high economic efficiency.
Iron, stainless steel is not technically correct can cause fire, nose break is not safe for users. To ensure absolute safety for the workers, as well as to limit the frequency of causing low drill, you should note the following issues.

1. Effective Iron Drill Selection Guide:

There are many types of iron drills on the market, but it is recommended that the HSS drills have a bit of high hardness Coban that can drill all metals.

2. The correct way to drill iron:

Select drill head to suit your work requirements

Fix materials before drilling

For accurate and precise drills, use a clamp to fix the drilling position and choose a lining material such as wood, plastic


Mark the position of the drill to avoid deviation

When drilling on non-flat parts, drill a small drill before drilling.
When metal drilling due to friction causes small sparks to fire, it can also cause fire and explosion, so to be safe, prepare the coolant solution to prevent the burner from being burnt and the fire extinguisher in place. control.
Always pay special attention to safety glasses, gloves, and workwear to ensure safety before sparks and splinters.
When drilling to maintain average drilling speed, drill slowly and regularly to ensure the drill goes accurately and does not break. When drilling 2-5mm, drill bits should be removed to clean the debris, metal shavings to prevent drilling.
When drilling on non-flat parts, drill a small drill before drilling.
When metal drilling due to friction causes small sparks to fire, it can also cause fire and explosion, so to be safe, prepare the coolant solution to prevent the burner from being burnt and the fire extinguisher in place. control.
Always pay special attention to safety glasses, gloves, and workwear to ensure safety before sparks and splinters.
When drilling to maintain average drilling speed, drill slowly and regularly to ensure the drill goes accurately and does not break. When drilling 2-5mm, drill bits should be removed to clean the debris, metal shavings to prevent drilling.

Author

Leave a comment

Search

Back to Top